EWM Cool XQ 40 Скачать руководство пользователя

Страница: 40 / 54

Maintenance, care and disposal

Disposing of equipment

099-005630-EW501

02.03.2021

Figure 6-11

Follow official regulations on disposal!

• After cleaning, remove any mechanical blockages from the fans, close the machine in reverse order

and check according to applicable regulations.

6.3.5 Annual test (inspection and testing during operation)

A periodic test according to IEC 60974-4 "Periodic inspection and test" has to be carried out. In addition

to the regulations on testing given here, the relevant local laws and regulations must also be observed.
For more information refer to the "Warranty registration" brochure supplied and our information regarding

warranty, maintenance and testing at

www.ewm-group.com

6.4 Disposing of equipment

Proper disposal!

The machine contains valuable raw materials, which should be recycled, and electronic compo-

nents, which must be disposed of.

• Do not dispose of in household waste!

• Observe the local regulations regarding disposal!

• According to European provisions (Directive 2012/19/EU on Waste of Electrical and Electronic

Equipment), used electric and electronic equipment may no longer be placed in unsorted municipal

waste. It must be collected separately. The symbol depicting a waste container on wheels indicates

that the equipment must be collected separately.

This machine has to be disposed of, or recycled, in accordance with the waste separation systems in

use.

• According to German law (law governing the distribution, taking back and environmentally correct dis-

posal of electric and electronic equipment (ElektroG)), used machines are to be placed in a collection

system separate from unsorted municipal waste. The public waste management utilities (communities)

have created collection points at which used equipment from private households can be disposed of

free of charge.

• Information about returning used equipment or about collections can be obtained from the respective

municipal administration office.

• In addition to this, returns are also possible throughout Europe via EWM sales partners.

Содержание Cool XQ 40























































Результаты поиска

Содержание Cool XQ 40

Отзывы:

Похожие инструкции для Cool XQ 40

Бренды по названию

Популярные бренды

EWM Cool XQ 40, Руководство по эксплуатации

Результаты поиска

Содержание Cool XQ 40

Отзывы:

Похожие инструкции для Cool XQ 40

Бренды по названию

Популярные бренды