HPS-C - TS operating instructions
Page 25 / 32
The directory with the control program for the HPS-C controller is located on the computer's "D" drive under the name "HPS-
C-TS". Under this are the program and driver files and further subdirectories in which the various files are saved by the
program or have to be imported by the operator.
The display on the touchscreen control PC differs from the figure shown below as this computer does not have so many
available drives. However the program directory structure is the same.
The various subdirectories contain the following data:
•
"Data"
Log files with the saved process values, if permanent data backup is active
•
"ErrLog"
Error files with the detected problems
•
"Help"
Help files, which are opened when the "HELP" key is pressed
•
"Images"
Graphic diagrams for accessing via the image viewing function
•
"Language"
Language files, selection is made in the INI file
•
"Log"
Log files with the changes and inputs made
•
"Print"
Program printouts, if the "File" selection has been used
•
"Systems"
information about the control systems connected to the control PC
•
"Tools"
Files with information about the saved mould settings
The exchange of data between the control PC and another computer via the memory stick is carried out using the file
manager of the Windows operating system.
USB connections
with installed
memory stick
LAN connection
Fuse
Power supply
