EWheels Medical REMO AUTO-FLEX, Инструкция пользователя

Страница: 20 / 27

Instruction Booklet REMO AUTO-FLEX
18
There are two charging ports, one is on upper of scooter, and the other is on battery box.
Upper Charge Port (Figure 31)
•
Open the charge port cap
1.Insert the charger output cable into the charge port
2.Plug the AC cord into a standard electrical outlet on the wall
3.Check the charger LED indicator; make sure it’s in normal charging. During charging,
LED will indicate orange light.
4.When unplug, please make sure to remove the AC cord from the wall first, and then
charger output cable from the charge port.
•
Battery Box Charge Port (Figure 32)
1.Remove the battery box from the scooter and place it on a flat ground.
2.Open the charge port cap and connect the charger output cable into the charge port
3.Plug the AC cord of charger into a standard electrical outlet
4.Check the charger LED indicator; make sure it’s in normal charging. During charging,
LED will indicate orange light.
1 2
3 4
Charging Operation
：
Figure 31
•
Each country may supply different charger. The charging procedure may be
different from below. Chargers for lithium battery and lead-acid battery (optional)
are different.
•
The charger LED light should indicate red when pre-charging. If not, please
contact your authorized dealer.
•
Inspect the battery charger before each use, make sure connectors are dry and
clean. Do not attempt to use an extension cord to plug in your battery charger.
•
Do not use other brand of charger to charge the scooter, only use the charger
equipped with originally
•
The battery charger is equipped with cooling fan. If the fan does not appear to
be working correctly, please turn off the charger immediately as it may be
overheated. Please contact your authorized scooter dealer.
•
Do not leave charger plugged into your scooter with charger switched off as this
may discharge your batteries. Always unplug the cables when finishing charging.
•
Be aware that the battery charger case may become hot during charging. Please
avoid skin contact.
•
Keep the charger stored in a well-ventilated area, do not drop the charger.
•
Output Voltage: 100V~240V (Figure 30)
1.Charger output cable, 3pins connector (U)
2.AC power cord (V)
3.LED Indicator(W)
- RED LIGHT ON : Pre-charging
- ORANGE LIGHT ON : Normal Charging
- GREEN LIGHT ON: Fully Charged.
Lead-acid Battery Charger
：
Figure 30
(W)
(U)
(V)