Instruction Booklet
REMO AUTO-FLEX
11
The light will be showing the battery status or errors of
scooter. If scooter has errors, the light indicator will be
flashing (see section 8). This light indicator is also the
indication of battery status (see section 6-3). (Figure 10)
(1)
(2)
(3)
Battery / Error Light Indicator
：
•
Press acceleration [ ] / deceleration [ ] button
to increase / decrease speed.
•
There are 3 different speeds of adjustment
fastest 3 > 2 > 1 slowest. (Figure 11)
Speed Adjustment
：
Figure 10
Figure 12
Figure 11
•
Do not set the speed at maximum when operating
the scooter.
•
Adjust the speed at maximum when inclining
a slope, and adjust to minimum speed when
declining.
Press horn button to sound the buzzer. Buzzer sound
and light will last until you release the horn button
(Figure 13)
Horn
：
•
Press power button to turn on/off (Figure 14)
(see section 4-1 for details)
Main Switch (Touch Screen Version)
：
•
Turn the key clockwise to turn on,
counterclockwise to turn off (Figure 15)
Main Switch (Key Version)
：
•
Scooter will go into sleep mode with
one long beep warning sound if no
throttle activity is detected for
programmable time period. (Default
programmable time is 10 mins.)
•
When scooter is in sleep mode, all
lights on the control panel will be off,
and the scooter will not respond to commands.
•
To wake up the scooter, turn the power (key) switch off and then on again.
Sleep Mode
：
Figure 13
•
Press button [ ] once to switch on the head-light
and tail - light, the [ ] will be lighted on the panel.
•
Switch off by pressing the button again, the [ ]
light will be off on the panel (figure 12)
Head-light / Tail-light
：
Tail-light will be on anyway when the brake is
engaged and when the scooter speed is reduced.
4-2 OPERATION OF MAIN SWITCH
Figure 15
Figure 14
