11
5.0 D eliver y, p a ck a gin g an d s tora ge
5.1 Safety information for
transporting
NOTICE
Damage due to improper transporting
Significant material damage can occur in conjunction with
improper transport.
Therefore:
• Proceed carefully during the unloading and delivery of the pack-
aged items to its final destination and comply with the information
shown on the packaging.
• Only remove the actuator from its packaging right before installation.
• Note storage requirements if actuator needs to be returned to the
manufacturer (⮑ 5.5 Storage, page 12).
5.2 Delivery inspection
The CASM linear actuator is delivered as one packaged unit
in a box or on pallets.
Check the delivery for completeness and damage immedi-
ately upon receipt.
Check completeness of delivery:
• Unpack drive.
• Check that the options are mounted or packed.
• Check the drive for damage, scratches, dents.
Proceed as follows in conjunction with visible exterior trans-
port damage:
• Do not accept delivery or do so only with reservations.
• Record scope of damage on the transport documents or
on the bill of delivery of the shipping company.
• Initiate complaint.
NOTE
Report any damage as soon as it has been recognized. Damage
claims can only be asserted within the transporter’s applicable
complaint period.
5.3 Returning actuator to
the manufacturer
Proceed as follows for the return transport:
1. Dismantle the device if necessary (⮑ 10 Dismantling,
page 27).
2. Pack device in its original packaging. Follow storage
conditions (⮑ 5.5 Storage, page 12).
3. Send to manufacturer. The address is listed on the back
cover of this manual.
5.4 Packaging
For packaging
The individual packaged pieces have been packaged appro-
priately according to the expected transport conditions.
Only environmentally- friendly materials were used for the
packaging.
The packaging is supposed to protect the individual compo-
nents from damage caused by the transport, corrosion and
other damage until they are ready for installation. Therefore,
do not destroy the packaging and only remove it shortly
prior to the installation. Keep packaging for possible return
shipment to the manufacturer (⮑ 5.3 Returning actuator
to the manufacturer, page 11).
If you want to dispose of the packaging, please note and ad-
here to the following:
NOTE
Environmental damage due to incorrect disposal
Packaging material consists of valuable raw materials and in
many cases they can be sensibly recycled and reused.
Therefore:
• Dispose of packaging material in an environmentally correct way.
• Comply with locally applicable disposal regulations.
5.0 Delivery, packaging and storage
