182
KPM.X.Systemhandbuch_X3.0.EN.V1.9 | Subject to misprints and technical changes.
Figure 215
–
Dashboard blacklist
A maintenance task is created for each installation location and the "Unsafe installation
location" and "Unsafe identification media" fields change to yellow.
8.12.5
Identification media that cannot be written to
Figure 216
–
Identification media that cannot be written to
The menu item "Non-writable identification media" indicates that the internal card memory
(currently 4k bytes) is fully uded for certain identification media. The tile turns yellow if
"Identification media that cannot be written to" are in circulation. This is a security pre-
caution. The right-hand side shows the number of "Identification media that cannot be
written to".
Notice:
Xesar segment on the identification medium requires around 2Kb.
Attention:
If the memory capacity of the identification medium enabled for Xesar
is exceeded, the field turns yellow. A maximum of 96 zones can be written to the
identification medium. This warning may appear if you extend the identification me-
dium's authorisation.