3722-IG-002 Installation and User Manual
February 6, 2019
6
Site Selection
The Model 3722 was designed to be mounted to the ceiling and should be positioned, if possible, so that when the J1772
power connector is lowered, it will be close to the power inlet on the electric vehicle. This location is recommended because
the cable, when extended, has a 20 ft. reach (Figure 3), easily reaching the front, rear or side of the Electric Vehicle being
serviced. It is also recommended that the cable lowers between vehicles to make it easier to access the power inlet and
prevent the power connector from hitting the vehicle(s).
Figure 3
