User Manual and Installation Guide
Model 3722-001 (Rev. J) Overhead EVSE / 30A
Copyright EVSE LLC 2012-2015. All rights reserved. Patents pending.
1
Introduction to Model 3722-A30XX EVSE Unit
The Model 3722 Electric Vehicle Supply Equipment (EVSE) is a 7.2 KW ceiling-mounted EVSE with cable management
retraction, capable of providing up to 30A at 208-240VAC, single phase, 50 or 60Hz. This unit complies with the SAE J1772
specifications for supplying electrical power to a J1772 compatible Electric Vehicle (EV). The Model 3722 stores the power
cable safely out of reach and off the ground, eliminating a tripping hazard and tampering. When the Model 3722 is activated
by using either the separately mounted ON switch or via a separately mounted Payment/Gateway Module transaction, the
cable and connector lower to an ADA height where it can be easily reached and extended a maximum of 20 feet to the
Electric Vehicle power inlet by pressing and holding the switch on the J1772 connector (Figure 1).
The Model 3722 is comprised of the Electric Vehicle Supply Equipment (EVSE) with a motorized cable controller and the Data
Router, which is used to activate the EVSE (turning it on or off). There are a number of operating options that are compatible
with the Model 3722, ranging from simple ON switches, to a Data Router that displays kW’s used, the price per kW, and the
total sale cost. The operating option you select is included with the shipment of the EVSE unit.
J1772 Connector
Extension Switch
Zigbee Antenna
(Optional)
Data Router
RF Wireless
Simple ON
Switch (Optional)
Remote RF
Antenna (Optional)
Figure 1
Wired Simple
ON Switch
(Optional)
