700 P electronics module
Installation
5.
59
5.5
Electrical installation
Warning!
Risk of injury or damage to the device!
Only authorized and qualified electricians are permitted to install
the 700 P electronics module and open the housing. The 700 P
electronics module may only be put into operation when the hous-
ing is closed, and must be connected to protection earth. Modifica-
tions other than those described in this manual are not permitted.
Only wire the 700 P electronics module when it is disconnected
from the mains power. Connect the 700 P electronics module in
accordance with the wiring diagrams and applicable national and
local regulations.
Danger!
Risk of injury or death!
External voltages may be connected even with the operating volt-
age switched off.
Warning!
Risk of injury or damage to the device!
The 700 P electronics module is not equipped with a mains switch
and is in operation as soon as the supply voltage is applied. An
external switch or circuit breaker with a clearly visible "OFF" switch
position is therefore necessary.
When a local line fuse is used (6 A) at 100 to 240 V AC supply, the
cross-section of the mains cable must be at least 0.75 mm² (AWG
18).
When connecting system components (e.g. devices, motors,
pumps) as well as when entering operating data, the system com-
ponents must be switched off in order to prevent uncontrolled ac-
tivation or any incorrect operation.
Installations with internal supplied loads (e.g. dosing machines) or
models with fixed installed connection wires (plug connection)
must not have a current consumption higher than 6 A.
Please note
The 700 P electronics module is not suitable for electrical connec-
tion with permanently installed cable conduits. If the cable glands
do not meet local installation rules and regulations, these glands
must be replaced with suitable ones.
Содержание WALLACE & TIERNAN 700 P
