manualshive.com logo in svg

Evoqua WALLACE & TIERNAN 700 P, Инструкция по эксплуатации

Поделиться
Скачать
Evoqua WALLACE & TIERNAN 700 P Скачать руководство пользователя страница 55

700 P electronics module

Installation

5.

55

5.4

Mechanical installation

Please note

The Pool Management System is comprised of the DEPOLOX

®

Pool E or DEPOLOX

®

 5 E flow cell and the 700 P electronics mod-

ule. We recommend joint assembly of the modules. Leave a clear-
ance of at least 250 mm above the Pool Management System for
working with the sensors.

Warning!

Risk of injury or damage to the installation!

All electrical work on the equipment must be performed only by au-
thorized and qualified electricians. Modifications to the device oth-
er than those described in this instruction manual are not
permitted.

The following installation options are available to mount the flow
cell and 700 P electronics module:

•

with top-hat rail

•

without top-hat rail

Please note

The 700 P electronics module is not suitable for electrical connec-
tion with permanently installed cable conduits. If the cable glands
do not meet local installation rules and regulations, these glands
must be replaced with suitable ones.

5.4.1

Mechanical installation with top-hat rail

Proceed as follows, see Chapter 5.4.3 “Dimension Drawings”:

1

Secure the top-hat rail to a solid wall using the supplied dow-
els and screws. (screws and dowels for fixing to a solid wall
are included in the scope of delivery.)

Please note

If the device is to be installed on a suitable lightweight wall, use the
relevant mounting fixtures (not included in the scope of delivery).

2

Hook the 700 P electronics module onto the top-hat rail so that
it is flush at the right.

Содержание WALLACE & TIERNAN 700 P



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды