IONPURE
®
G2 DISPLAY BOARD – IP-POWERDSP-G2
IP-POWERDSP-G2MAN Rev 1
Page 5 of 25
1
Introduction
1.1
Caution and Warning Messages
WARNING and CAUTION labels are used to attract attention to essential or critical information in
this manual. The labels are located to the left of the associated messages. Caution and Warning
messages will be located immediately before related text.
Warnings indicate condition, practices, or procedures that must be
observed to avoid personal injury or fatalities.
Cautions indicate a situation that may cause damage or destruction of
equipment or may pose a long-term health hazard.
Notes are also used to draw attention to information. Notes may be located before or after the
related text.
NOTE:
Notes are used to add information, state exceptions, and point out areas that may be of
greater interest or importance.
1.2
General Description
Figure 1: G2 Display Board
The Ionpure® G2 Display Board IP-POWERDSP-G2 is a digital controller designed specifically to
function as the human interface that allows an operator to control and monitor the Ionpure
G2 DC
Power Controller IP-POWER600-G2.
