7
www.evolutionpowertools.com
FR
ES
DE
EN
IT
NL
dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Avoid accidental starting. Ensure
the switch is in the off-position before
plugging in.
Carrying power tools with your
finger on the switch or plugging in power tools
that have the switch on invites accidents.
d) Remove any adjusting key or spanner
before turning the power tool on.
A spanner
or a key left attached to a rotating part of the
power tool may result in personal injury.
e) Do not overreach.
Keep proper footing and
balance at all times. This enables better control of
the power tool in unexpected situations.
f) Dress properly.
Do not wear loose
clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts.
Loose clothes, jewellery or long hair can be
caught in moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used.
Use of these devices can reduce dust
related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job better
and safer when used at the rate for which it
was designed.
b) Do not use the power tool if the switch
does not turn it on and off.
Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power source
before making any adjustments, changing
accessories, or storing power tools.
Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d)
Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tools operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and
tool bits etc., in accordance with these
instructions and in the manner intended
for the particular type of power tool,
taking into account the working conditions
and the work to be performed.
Use of
the power tool for operations different from
intended could result in a hazardous situation
.
5) Service
Have your power tool serviced by a
qualified repair person using only genuine
replacement parts.
This will ensure that the
safety of the power tool is properly maintained.
HEALTH ADVICE
WARNING:
When drilling, sanding, sawing
or grinding, dust particles will be produced.
In some instances, depending on the materials
you are working with, this dust can be
particularly harmful to you (e.g. lead from
old gloss paint).You are advised to consider
the risks associated with the materials you
are working with and to reduce the risk of
exposure.
You should:
•
Work in a well-ventilated area.
•
Work with approved safety equipment, such
as dust masks that are specially designed to
filter microscopic particles.
