29
www.evolutionpowertools.com
FR
ES
DE
EN
IT
NL
ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your Local Authority or retailer for recycling advice.
TROUBLE SHOOTING GUIDE
CONDITION
POSSIBLE CAUSE
ACTION
Machine will not start.
Plug removed from outlet
socket or outlet socket
not switched ‘on’.
Replace plug and/or switch
‘on’ the outlet socket.
Sliding Carriage will
not move.
Sliding Carriage Locking
Latch still fully or
partially engaged.
Ensure that the Carriage
Locking Latch is completely
disengaged by sliding it
fully to the right.
Left Hand Table Extension
will not deploy.
One or both (usually
the rear) of the under-table
locking knobs not
l oosened.
Ensure that both locking
knobs are sufficiently
loosened. Deploy the table
extension and retighten both
under-table locking knobs.
Blade will not rise or fall.
Dual Purpose Rise and
Fall Handle partially engaged
with curved toothed rack.
Ensure that the Handle is
in its outer position. Pull the
Handle out from the machine
slightly to confirm it is deployed
in the outer position.
Blade will not tilt.
Tilt Locking Screw
not loosened.
Loosen the Tilt Locking Screw.
Tilt the blade to the desired
angle and then retighten the
locking screw
Blade Guard does not
adjust automatically.
Over -tightened rear fixing
screw and wingnut.
Loosen wingnut slightly until
Blade Guard operation is
smooth and satisfactory.
