Appendix
· 96 ·
EVOC-SY532
the cold reset sequence, the system usually executes a couple of basic hardware
checks, then load the operating system from hard drive to working memory -> boot.
e
dule).
Module Bracket
ed to fix the module and ensure safe contact and transportation.
designed for these
odules, because standard fixing measures are sufficient for them.
rating
pecific format required by I/O devices (e.g. hard drive, printer and monitor).
SATA interface provides hotswap function for hard drive system of the device. The
e configuration is a RAID1 system with SATA RAID controller
be replaced without having to reboot the PC.
e CPU
er-threading technology,
dual-core CPU remarkably improves the speed of computing and program execution.
Modul
Modules refer to PLC, programming device or plug-in unit. These modules can be
local modules, expansion modules, interfaces or mass storage (mass storage mo
Module bracket is us
Impact and vibration especially affects large and heavy modules. Therefore, it is
recommended to use module bracket for this type of module. There are also short,
light and compact modules on the market. Module bracket is not
m
Warm Reset
Reboot the computer after the program is interrupted. Load and reboot the ope
system again. Hot key CTRL+ ALT+ DEL can be used to execute warm reset.
Drivers
Program part of operating system. They modify user program data according to
s
Hotswap
prerequisite of th
(onboard or slot module) and at least two SATA detachable supports. The advantage
of hotswap is that faulty hard drive can
Dual-cor
Compared with last-generation single-core CPUs using hyp
Содержание SY532
