Application Scheme
EVOC-SY532
· 11 ·
2.3 Opening the Box and Initial Examination
2.3.1 Opening the Box
Please pay attention to the following issues when opening the box:
●
Do not discard the original packing material. Please keep the original packing
material for re-transportation.
●
Please keep the documentation at a safe place. The documentation, which is a part
of the device, is required for initial device debugging.
●
When doing the initial examination, please check whether there are distinct
damages to the device caused during the transport.
●
Please check whether the delivery contains the intact device and all of the
independently ordered accessories. Please contact the customer service when any
unconformity or transportation damages occur.
2.3.2 Markings for PC Identification
Attention
When the product needs to be repaired or after it has been stolen, these codes can be
used to identify the PC. Please do not rip them off.
Serial number: located on the chassis body (as shown below)
2.4 External Environment Conditions
The following conditions should be considered when planning the project:
The weather and mechanical environment conditions specified in the operation
Содержание SY532
