EVOC SY532, Руководство пользователя

Страница: 180 / 203

Appendix
· 74 · EVOC-SY532

Continuously press Fn + F7, when it
is confirmed that display device for
screen image has been complete
switched, press the following:
 Press Fn + F5 / Fn + F6 and adjust
the brightness of internal LCD.
The power
supply is not
shut off, but
no display
after a while.
It has entered
standby or
hibernation mod
y on the screen
mputer may
r hibernation mode
into
e.
press keys that have no effect to the
action (Ctrl and Shift, etc.)
 To save energy, the co
 Due to power saving function,
sometimes the displa
may disappear. Press any key to
restore it. At this time, do not use
keys to be used when selected, please
have entered into standby mode
automatically (power LED is green
and flashing) o
(power LED is off). At this time,
press the power switch.
A residual
image appears
(for example,
there are green,
red or blue dots
on the screen)
or certain dots
cannot display
correct color
Same screen ima
stays for too long.
s too long on the
sticated
(which means 99.998% pixel is
working normally), it should be
deemed normal.
ge
screen, a residual image will appear.
This is not a fault. When a different
image is to be displayed, the residual
image will disappear.
 Production of color LCD requires
high precision and sophi
 If certain image stay
technology. If below 0.002% pixel
cannot be lit up or is always lit up