EVOC EPE-1814V2NAR, Руководство пользователя

Страница: 35 / 58

Chapter 3 BIOS Setup
EPE­1814V2NAR ­ 31 ­
PIO Mode Cycle Time Transfer Rate Standard
Mode 0 600 3.3 (MB/S) ATA
Mode 1 383 5.2 (MB/S) ATA
Mode 2 240 8.3 (MB/S) ATA
Mode 3 180 11.1 (MB/S) ATA­2
Mode 4 120 16.7 (MB/S) ATA­2
Auto: BIOS Automatic Detection Selection. (Default)
l
IDE Primary Slave PIO
This option represents the PIO mode selection for the slave hard disk in IDE
channel 1.
l
IDE Primary Master UDMA
This option enables the Ultra DMA data transmitting mode of the master hard
disk in IDE channel 1. The differences between Ultra DMA and common DMA
are: under Ultra DMA mode, data are transmitted both in rising edge and
descending edge of the clock; under the same time frequency, its speed is twice
that of DMA.
Disabled
Auto: BIOS Automatic Detection Selection. (Default)
l
IDE Primary Slave UDMA
The same as above.
l
On­Chip Secondary PCI IDE
This option chooses whether to use the second IDE channel on South Bridge.
Disabled
Enabled (Default)
l
IDE Secondary Master PIO
This option represents the PIO mode selection of the master hard disk on IDE
channel 2.
l
IDE Secondary Slave PIO