Evo DE ARUN100, Инструкция по эксплуатации

Страница: 8 / 24

4. Attach the Console
8
Final Checks
Your Runner is now assembled. Please make the following final checks before you use it for the first time.
r
Make sure all screws, bolts and nuts are tightened securely.
r
Make sure you have positioned it on a flat, level surface floor.
5. Attach the Bottle Holder
Attach the r Bottle Holder (8) to the top end of
the Left Upright Post (2) with two Self-Tapping Screws (11)
mQSPWJEFEBOETFDVSFEXJUIUIF4DSFXESJWFS
Make sure the screws are fully
tightened with the screwdriver.
!
FIXINGS: FIXINGS:
x
4
Part
No.
74
FIXINGS: TOOLS:
FIXINGS: FIXINGS:
x
2
FIXINGS: TOOLS:
Part
No.
11
1.
2.
3.
4.
Remove the four r M5 x 10mm Fixing Screws (74) which are located in the
back of the Console (5) .
Slide the 1. Console Cables (2pins & 3 pins) through the open hole of
the Console Bracket carefully as shown.
Attach the 2. Console (5) to the Console Bracket
assembled on the Bottom Handle Assembly (4)
with four M5 x 10mm Fixing Screws (74)
and secure with the Cross Screwdriver.
Connect the 3. Console Cables (2pins & 3 pins) and Top Section Wires
(2 pins & 3 pins) (21 / 20) together accordingly and tightly.
Take care 4. to ensure the wires are connected as tightly as posssible.
Slide the rest of the connect wires into the console post carefully
after the console attachment.
Make sure the screws are fully
tightened with the screw driver.
!