Evinox ModuSat TP 40-10, Инструкция по установке, наладке и обслуживанию

Страница: 17 / 45

17
3.4 Hydraulic connections
The ModuSat TP is designed to be wall mounted with the typical primary circuit and
domestic water hydraulic connections as shown here below. (Other configurations are
available; please refer to pages 10-13).
In order to ease the installation
and maintenance of the unit, it is
recommended to follow the
instructions about minimum
spacing.
The safety valve drain
must be connected to a
tundish that allows a
visual check, in the event of a
system issue or valve discharge.
This must be installed in such a
way so as to prevent damage or
risk of injury to occupants,
children or animals. Evinox
cannot be held responsible for
any damage caused by incorrect
installation.

The unit must be
connected to a suitable
primary network that
provides sufficient flow
and temperature as per
the system design.

The system must be fully cleaned and treated in line with the requirements detailed
in section 3 of this manual.
Minimum space requirements for access and servicing:

Front: 700 mm

Side: 50 mm

Bottom: 400 mm