EVGA Z270 Stinger Скачать руководство пользователя страница 75

Страница: 75 / 128

EVGA Z270 Stinger (111-KS-E272)

- 75 -

Repairing an array within IRST

This section of the guide will illustrate how to repair a degraded array from within the

IRST. For purposes of this guide, we are repairing a degraded RAID 1 array using a

third drive plugged into the controller, but not currently in use.

Below, you can see a degraded array, and one of its drives reported as missing/failed.

The data on the other drive is still intact, but the fault tolerance is offline due to the
missing/failed drive. The IRST also shows several warnings, the "!" for "Status," a"!" for

the portion of the array missing (showing the degradation of the logical drive), and the

"!" for the physical drive, which also states 0GB – a further indicator of a faulty drive.

You can repair the array from here or from the Manage tab at the top of IRST.

Содержание Z270 Stinger

































































































































Результаты поиска

Содержание Z270 Stinger

Отзывы:

EVGA Z270 Stinger, Руководство пользователя, Страница: 75 / 128

Результаты поиска

Содержание Z270 Stinger

Отзывы: