EVGA Z270 Stinger (111-KS-E272)
- 16 -
6. 24-pin ATX power connector
The main power for the motherboard is located on the right side of the board
and perpendicular to the PCB; this is also described as a “Vertical” connector
(See Page 37 for more specifics to the connector itself, and associated
wiring/pinouts). The 24-pin connector IS directional and the connector needs
the tab on the socket to line up with the release clip located on the 24-pin
connector from the power supply. This connector pulls the bulk of the power
for all components; other connectors, such as EPS, PCI-E (video card AND
motherboard sides), have been added to reduce the load and increase longevity
due to wiring and trace limitations.
7. 8-pin EPS Connector
The EPS is dedicated power for the CPU (See Page 38 for more specifics to the
connector itself, and associated wiring/pinouts). Carefully choose the correct
power cable by consulting with the installation manual for your power supply.
This connector is designed only to work with an EPS or CPU cable. System
builders may make the mistake of plugging in a PCI-E 8-pin or 6+2-pin
connector, which will prevent the board from POSTing and possibly short or
damage the board; although the cables appear similar, they are wired differently
and attaching a PCI-E cable to an EPS connector may cause damage to the
motherboard.
8. Intel SATA 3/6G Ports
The Intel Z270 PCH has a 6-port SATA 3/6G controller (See Page 44 for
specifics on the connectors). This controller is backwards-compatible with
SATA and SATA 2 devices, and supports SSDs, HDDs and various types of
optical devices (CDROM, DVDROM, BD-ROM, etc). The controller also
supports NCQ, TRIM, hot swap capability (provided the proper HDD/SSD
bays/racks are installed), and RAID levels 0/1/5/10.
9. U.2 Port
U.2, originally known as SFF-8639, is the next generation of SATA Express.
U.2 uses the same logic as SATA Express, but with twice the available
bandwidth, and a smaller cable connector. U.2 brings out the best of both
worlds of SATA Express and M.2; U.2 has the same max bandwidth available as
M.2 by using four PCI-E Gen3 lanes, but in a 2.5in. SSD form-factor, similar to
SATA Express. U.2 provides a solution to potential heating problems that may
be present in some M.2 solutions.
Содержание Z270 Stinger
