EVGA 160-CX-W999 Скачать руководство пользователя страница 70

Страница: 70 / 161

EVGA SR-3 DARK (160-CX-W999)

- 70 -

Which types of RAID can I use with my setup?

1 Drive

–

No RAID arrays are supported

2 Drives

–

RAID0 for speed (do regular backups) or RAID1 for data protection.

3 Drives

–

RAID0 for speed (do regular backups) or RAID5 for speed and protection.

4 Drives

–

RAID0 for speed (do regular backups), RAID5 for speed and protection,

RAID10 for the best balance of Speed and protection.

5 Drives

–

RAID0 for speed (do regular backups), but it will start to show diminishing

returns on performance; and RAID5 for speed and protection.

6 Drives - RAID0 for speed (do regular backups), but very marginal performance

difference over 4 or 5 drive stripes; and RAID5 for speed and protection.

Also, you can run more than one array on your controller, so long as the total is under
six (6) drives.

Configuring the Array for SATA and sSATA

Please note that this section was configured, in part, with an earlier version of the

EVGA GUI BIOS. The current GUI BIOS may look different, but will follow a similar

set of steps to create and repair a RAID volume.

Attach all SATA and/or sSATA devices you intend to use, and make sure power is

attached. Power the system on. Press the “Delete” key repeatedly to enter BIOS. Once

into BIOS you will need to enable the RAID function of the board.
From

BIOS, click on (or navigate with your arrow keys) the “Advanced” tab at the top,

and then on “SATA Configuration.”

Содержание 160-CX-W999


































































































































































Результаты поиска

Содержание 160-CX-W999

Отзывы:

Похожие инструкции для 160-CX-W999

Бренды по названию

Популярные бренды

EVGA 160-CX-W999, Руководство по установке

Результаты поиска

Содержание 160-CX-W999

Отзывы:

Похожие инструкции для 160-CX-W999

Бренды по названию

Популярные бренды