cuiheat.com
126345-01D
17
INSTALLATION
Continued
Figure 36A - Placing 24/30" Bottom Rear Log
Figure 37 - Placing 24/30" Bottom Middle Log
Pins for Bottom
Rear Log
Rear Bottom Log
Pins for
Bottom
Middle Log
Bottom Middle Log
Burner Base
Figure 36 - 24/30" Burner base
MODELS EWLCT24/30R
It is very important to install these logs exactly as instructed. Do not
modify logs. Only use logs supplied with heater.
1. Place bottom rear log onto base. Holes in bottom of log must seat
over pins on base as shown in Figures 36 and 36A.
2. Place bottom middle log onto base. Holes in bottom of log must
seat over pins on base see Figures 36A and 37.
Figure 38 - Placing 24/30" Bottom Front Log
Figure 39 - Placing 24/30" Top Middle Log
Figure 40 - Placing 24/30" Top Left Log
Pins for Top
Left Log
Pin for Top
Right Log
Bottom Front Log
Top Middle Log
Top Left Log
Pin for Top
Middle Log
3. Place bottom front log onto grate as shown in Figure 38. Front
log has cut outs for the fingers of the grate to fit into.
4. Place top middle log as shown in Figure 39. This log will fit on
the pin on rear bottom log resting on the flat recess on the middle
bottom log.
5. Place top left log as shown in Figure 40. This log will fit on the
matching pin on the rear bottom log and resting over the flat
recesses on the bottom middle log and bottom front log.
