evertz 8010TM Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 98

background image

IMPORTANT SAFETY INSTRUCTIONS

The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “Dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (Servicing) instructions
in the literature accompanying the product.

•

Read these instructions

•

Keep these instructions.

•

Heed all warnings.

•

Follow all instructions.

•

Do not use this apparatus near water

•

Clean only with dry cloth.

•

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

•

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

•

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has

two blades with one wider than other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

•

Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles and the point where they exit from the apparatus.

•

Only use attachments/accessories specified by the manufacturer

•

Unplug this apparatus during lightning storms or when unused for long periods of time.

•

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC – SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE.

WARNING

DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO
OBJECTS FILLED WITH LIQUIDS ARE PLACED ON THE EQUIPMENT.

WARNING

TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE
POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE.

WARNING

THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE.

«
1
2
3
4
5
...
»

Содержание 8010TM



































































































Отзывы:

Нет отзывов

Похожие инструкции для 8010TM

Бренд: Uebo Страницы: 4

Бренд: V-TAC Страницы: 3

Бренд: Magnimage Страницы: 40

Бренд: Sigineer Power Страницы: 39

Бренд: Gbxpoint Страницы: 4

Бренд: Baja Silueta Страницы: 99

Бренд: Delta Electronics Страницы: 2

CONSONANCE REFERENCE DB1

Бренд: Opera Страницы: 3

INTERNATIONAL TRAVEL ADAPTER

Бренд: Igo Страницы: 1

Бренд: Lika Страницы: 2

Бренд: RGBlink Страницы: 46

Бренд: LogicLadder Страницы: 55

Бренд: nedis Страницы: 52

Бренд: foxunhd Страницы: 5

Бренд: Yarvik Страницы: 64

Бренд: J-Tech Digital Страницы: 5

Бренд: Advantech Страницы: 4

Бренд: Soarland & Hexin Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды