evertz 7708VB-8-HSE, Руководство пользователя

Страница: 21 / 50

7708VB-8-HSESeries User Manual
8 SDI/ASI or 6 HD-SDI plus Ethernet Fiber Transceiver
Revision 0.1
Page - 11
4.2. DOT-MATRIX DISPLAY / CARD STATUS AND CONTROLS
Additional status monitoring and controls are provided via the 4-digit dot-matrix display located at the
card-edge. The card-edge shaft-encoder/pushbutton (see Figure 4-1) is used to navigate through the
display menus.
You can use the toggle switch to move up and down the list of available parameters to adjust. To
adjust any parameter, use the toggle switch to move up or down to the desired parameter and press
the pushbutton. Using the toggle switch, adjust the parameter to its desired value. If the parameter is
a numerical value, the number will increase if you push up on the toggle switch and decrease if you
push down on the toggle switch. If the parameter contains a list of choices, you can cycle through the
list by pressing the toggle switch in either direction. The parameter values are changed as you cycle
through the list.
When you have stopped at the desired value, depress the pushbutton. This will return to the
parameter select menu item you are setting (the display shows the parameter name you were setting).
To change another parameter, use the toggle switch to select other parameters. If neither the toggle
switch nor pushbutton is operated for several seconds the card edge control will exit the menu system
and return to an idle state.
On all menus, there is an extra selectable item:
BACK . Selecting BACK will take you to the previous
menu (the one that was used to get into the current menu). On the main menu, BACK will both take
the user to the normal operating mode (indicated by the moving line on the card edge display).
4.3. TOP LEVEL STATUS MENU STRUCTURE
Table 4-1 gives a brief description of the top level of the STATUS menu tree that appears when you
enter the Status card edge menu system. Selecting one of these items will take you down into the
next menu level to set the value of that parameter. The details of the each of the menu items are
described in sections 4.3.1 to 4.3.9.
VIN Displays the Video Input Status
VOUT Displays the Video Output Status
OPTO Displays the Optical Status settings
NET Displays the Network Status
VER Displays the software version
Table 4-1: Top Level STATUS Menu