evertz 7708VB-8-HSE, Руководство пользователя

Страница: 26 / 50

7708VB-8-HSE User Manual
8 SDI/ASI or 6 HD-SDI plus Ethernet Fiber Transceiver
Page - 16
Revision 0.1
4.3.8. Displaying the Link Capacity Usage (Fill)
Menu selection can display the network capacity usage of the Output. To display the network capacity
usage from the
STAT
menu, use the shaft encoder/pushbutton to select the
NET
menu item, and then
choose the
FILL
menu item.
STAT The following indications are possible:
0%
to
100%
Used network capacity of Output (%).
NET
FILL
0% to 100%
The indicated value will include any fixed cap/reserve values configured by the CTRL/NET/FILL menu,
even if the cap/reserve is under-utilized due to lower rate or absent input. It will not include capacity
that is dynamically allocated to Ethernet when CTRL/NET/FILL/ETH/AUTO is selected.
Various input signals are allocated network capacity as follows:
HD-SDI
Each HD-SDI signal will use 16.17% of network capacity.
SDI
Each SDI signal will use 2.94% of network capacity.
ETHERNET–1G
A 1Gbps Ethernet signal will use 13.23% of network capacity.
ETHERNET–780M
A 780Mbps (FBM) Ethernet signal will use 10.29% of network capacity.
ETHERNET–220M
A 220Mbps (FBM) Ethernet signal will use 2.94% of network capacity.
4.3.9. Displaying the Firmware Version
To display the module firmware version from the
STAT
menu, use the shaft encoder/pushbutton to
select the
VER
menu item. The following indications are possible:
STAT The software version will be displayed here. For example:
VER 1.0 BLD 067
VER
Software Version