570NAT-HW-X19
High Density Network Address Translator
Revision 1.0
Page - 7
2.3. SETTING DEVICE IP
The 570NAT-HW-X19 must first be configured through the frame controller. To do so, open a web
browser and type the IP address of the frame controller. You will be presented with the login menu,
Figure 2-2 : WebEASY
®
- Frame Controller Login
The default login/password combination is admin/admin.
After successfully logging into the frame controller, you will be presented with the FC Menu. If not, you
can access the FC menu by selecting ‘Frame’ from the side menu (highlighted below in Figure 2-3)
Figure 2-3 : WebEASY
®
- Frame Controller - FC Menu
Once in the FC Menu, take note of which slot the 570NAT-X19 card you are looking to configure.
To set the IP address for this card, proceed by selecting ‘proxy configuration’ in the side menu.
Содержание 570NAT-HW-X19
Страница 2: ...This page left intentionally blank ...
Страница 10: ...570NAT HW X19 High Density Network Address Translator Revision 1 0 Page vi This page left intentionally blank ...
Страница 20: ...570NAT HW X19 High Density Network Address Translator Page 10 Revision 1 0 This page left intentionally blank ...
Страница 34: ...570NAT HW X19 High Density Network Address Translator Page 24 Revision 1 0 Figure 4 9 WebEASY VLAN Based NAT ...