evertz 570ASI-X19-10GE2 Скачать руководство пользователя страница 35

Страница: 35 / 40

570ASI–X19-10GE2 Series

User Manual

Page - 25

4.8. SYSTEM NOTIFY

Figure 4-14: WebEASY

- System Notify

4.8.1. System Monitoring Control
Temperature Warning Threshold:

This control allows the user to set the temperature threshold. If the

temperature exceeds the configured temperature threshold, the temperate status will change to active.

4.8.2. Board Notify
Temperature Traps:

This control allows the user to turn Enable/Disable the Temperature Trap.

Temperature Faults:

This temperature status is highlighted with this parameter. If a fault is active: the

temperature exceeds the temperature threshold, it is reflected with a red status. If a fault is inactive, it is

reflected as a green status.

4.8.3. Port Link Notify

For SFP1 to 6

Port Link Status SFP:

This status highlights Data port status. If the port is up, the status will be

inactive / green. If the port is down, the status will be active / red.

Port Link SFP Trap:

This control allows the user to enable trap receiving when the port is down and an

associated correction trap when the port is up.

Содержание 570ASI-X19-10GE2









































Результаты поиска

Содержание 570ASI-X19-10GE2

Отзывы:

Похожие инструкции для 570ASI-X19-10GE2

Бренды по названию

Популярные бренды

evertz 570ASI-X19-10GE2, Руководство пользователя

Результаты поиска

Содержание 570ASI-X19-10GE2

Отзывы:

Похожие инструкции для 570ASI-X19-10GE2

Бренды по названию

Популярные бренды