evertz 570ASI-X19-10GE2, Руководство пользователя

Страница: 22 / 40

570ASI–X19-10GE2 Series
User Manual
Page - 12
4.1.7. Card Control
Card Alias:
If desired the user may enter a custom card name which will be shown on the top left hand
corner of the card’s webpage in yellow:
Figure 4-6: WebEASY
®
- System / Card Control
To set/change the card alias, simply enter in the desired text and click on the “Apply” button on the top
of the page.
Load Factory Config: Pressing this button results in the factory configuration being loaded on the
card.
Reboot Card: This control is used to reboot the card. A pop up message will ask the user to confirm
the reboot. Click “OK”, when prompted. A reboot can take up to a few minutes, so be patient.
4.1.8. Genlock
Genlock Reference:
This control allows the user to select the reference type for genlock audio & video
sync. Options include External Genlock Ref 1, External Genlock Ref 2, PTP / Master PCR, Free Run.
Detected Genlock Reference: This control displays the detected genlock reference. The possible
genlock references include unsupported, absent, PAL, NTSC.
Default Genlock Reference: This control allows theuser to configure genlock reference rate. The
possible genlock references include NTSC and PAL.
4.1.9. RPC Control
For Main and Backup Ports
SFP Port: This field allows the user to select the SFP port for RPC control and tally.
Control MultiCast IP: This parameter allows the user to assign the IP address for RPC Control
MultiCast.
Tally MultiCast IP: This parameter allows the user to assign the IP address for RPC Tally MultiCast.
4.2. PRODUCT FEATURES
Figure 4-7: WebEASY
®
- Product Features
Product Serial Number: This field displays the serial number of the 570ASI-X19. Evertz requires you
to provide this serial number when requesting a product license.
Product Mac Address: This field displays the MAC address of the Product.