evertz 570ASI-X19-10GE2, Руководство пользователя

Страница: 24 / 40

570ASI–X19-10GE2 Series
User Manual
Page - 14
4.3.1. MPPM Control
For IP Inputs 1 to 6
Link Select: The link select control allows the user to configure the decoder link to Auto Packet Merge,
Main, Backup or Fail Over.
• Auto Packet Merge : Selecting this control will force the de-encapsulator link to merge valid packets
from both the main and backup links. It will disregard the extra good packet if received. This control
employs MPPM multi path packet merge.
• Main Port: Selecting this control will force the de-encapsulator link to accept packets only from the
Main Port.
• Backup Port: Selecting this control will force the de-encapsulator link to accept packets only from
the Backup Port.
• Fail Over : Selecting Fail Over, will allow for a simple redundancy model as highlighted with below
controls.
4.3.2. Stream Selection
For IP Inputs 1 to 6
IP Input Detect:
The 570ASI-X19 card can accept both SMPTE 2022-2 and SMPTE 2110/SMPTE
2022-6 sources. The 570ASI-X19 will automatically detect the IP input type provided. The IP Input field
reflects the detected type of IP input stream.
IP Input Sync Detect: This field indicates whether the IP input is synced with the card.
4.3.3. SMPTE 2110 & 2022-6 Receiving Buffer Mode
For IP Inputs 1 to 6
SDI Output Buffer Mode: This field allows the user to set the virtual SDI output mode. Possible
options are Low Latency (Engineering/Test Mode), Frame Buffer (Error Concealment Mode) and Line
Buffer (H/V Offset Mode).
SDI Output H Offset: This control allows the user to adjust the horizontal offset on the stream.
SDI Output V Offset: This control allows the user to adjust the vertical offset on the stream.
4.3.4. Input SFP Port Selection
For Main, Backup, Audio 1-4 Main, Audio 1-4 Backup, ANC Main & ANC Backup
SFP Port Selection: This dropdown menu allows the user to assign an Input Data Port as the Main
Data Port. The main data port will accept traffic and provide it to the decoder core.
4.3.5. IP Input Settings
For IP Inputs 1 to 6
Stream Alias:
This field allows the user to define the input stream alias name.
IP Address: This parameter allows the user to define input IP address / multicast address they want to
receive.
UDP Port Number: This parameter allows the user to select the input UDP port number.
Input IGMPV3 Mode:
This parameter allows the user to include/exclude input configured SSM
Sources.