evertz 3080UEP Series Скачать руководство пользователя

Страница: 45 / 62

3080UEP Series

Professional 3G/HD/SD Universal Contribution Encoding Platform

Revision 0.2

Page - 37

G Gamma Value:

This parameter allows the user to adjust the green portion of the gamma

correction factor.

B Gamma Value:

This parameter allows the user to adjust the blue portion of the gamma correction

factor.

Min R:

This parameter allows the user to adjust the minimum gain for the Cr component in YCrCb

domain. NOTE: The range in the card is from -50% to 100% in 0.1% steps.

Max R:

This parameter allows the user to adjust the maximum DC offset of the Cr component in +/-

200 quantization steps.

Min G:

This parameter allows the user to adjust the minimum gain for the G component in the RGB

domain. NOTE: The range in the card is from -50% to 100% in 0.1% steps.

Max G:

This parameter allows the user to adjust the maximum DC offset of the G component in +/-

200 quantization steps.

Min B:

This parameter allows the user to adjust the minimum gain for the B component in the RGB

domain. NOTE: The range in the card is from -50% to 100% in 0.1% steps.

Max B:

This parameter allows the user to adjust the maximum DC offset of the B component in +/-

200 quantization steps.

Black Soft Clip Knee Size:

This parameter allows the user to adjust the gain for the Cb component

in YCrCb domain. NOTE: The range in the card is from -50% to 100% in 0.1% steps.

White Soft Clip Knee Size:

This parameter allows the user to adjust the DC offset of the Cb

component in +/- 200 quantization steps.

Video Proc Reset:

This parameter resets the video proc controls to default. NOTE: This control is

write-only. It will return force when read. If set to force, all parameters under
itxe3080VideoProcControls node must be refreshed.

Содержание 3080UEP Series































































Результаты поиска

Содержание 3080UEP Series

Отзывы:

Похожие инструкции для 3080UEP Series

Бренды по названию

Популярные бренды

evertz 3080UEP Series, Руководство пользователя

Результаты поиска

Содержание 3080UEP Series

Отзывы:

Похожие инструкции для 3080UEP Series

Бренды по названию

Популярные бренды