evertz 3080UEP Series Скачать руководство пользователя

Страница: 44 / 62

3080UEP Series

Professional 3G/HD/SD Universal Contribution Encoding Platform

Page - 36

Revision 0.2

Video Proc Control

Enable Video Proc:

This parameter allows the user to bypass the whole video proc module or

enable processing if desired.

Enable Y Cb Cr Proc:

This parameter allows the user to bypass the YCbCr proc block if desired.

Y Gain:

This parameter allows the user to adjust the gain for the Y component in YCrCb domain.

NOTE: The range in the card is from -50% to 100% in 0.1% steps.

Y Offset:

(Black level) This parameter allows the user to adjust the DC offset of the Y component in

+/- 200 quantization steps.

Saturation Gain:

This parameter allows the user to adjust the saturation. NOTE: The range in the

card is from -50% to 100% in 0.1% steps.

Hue:

This parameter allows the user to adjust the hue. The range in the card is from -180 to 180 in

0.1 degree steps.

Luma Gamma Enable:

This parameter allows the user to enable or disable luma gamma.

Luma Gamma Value:

This parameter allows the user to adjust the gamma correction factor within

the integer range from -100 to 100.

Enable RGB Proc:

This parameter allows the user to bypass the RGB proc block if desired.

Video Gain:

This parameter allows the user to adjust the gain for the video. NOTE: The range in the

card is from -50% to 100% in 0.1% steps.

R Gain:

This parameter allows the user to adjust the gain of the R component in the RGB domain.

NOTE: The range in the card is from -50% to 100% in 0.1% steps.

G Gain:

This parameter allows the user to adjust the gain of the G component in the RGB domain.

NOTE: The range in the card is from -50% to 100% in 0.1% steps.

B Gain:

This parameter allows the user to adjust the gain of the B component in the RGB domain.

NOTE: The range in the card is from -50% to 100% in 0.1% steps.

R Offset:

This parameter allows the user to adjust the DC offset of the R component in +/- 200

quantization steps.

G Offset:

This parameter allows the user to adjust the DC offset of the G component in +/- 200

quantization steps.

B Offset:

This parameter allows the user to adjust the DC offset of the B component in +/- 200

quantization steps.

RGB Clip Enable:

This parameter allows the user to enable RGB clipping of the video.

RGB Gamma Enable:

This parameter allows the user to enable or disable RGB gamma.

R Gamma Value:

This parameter allows the user to adjust the red portion of the gamma correction

factor.

Содержание 3080UEP Series































































Результаты поиска

Содержание 3080UEP Series

Отзывы:

Похожие инструкции для 3080UEP Series

Бренды по названию

Популярные бренды

evertz 3080UEP Series, Руководство пользователя

Результаты поиска

Содержание 3080UEP Series

Отзывы:

Похожие инструкции для 3080UEP Series

Бренды по названию

Популярные бренды