evertz 3080UEP Series Скачать руководство пользователя страница 41

Страница: 41 / 62

3080UEP Series

Professional 3G/HD/SD Universal Contribution Encoding Platform

Revision 0.2

Page - 33

Syslog Configuration:

Syslog is a valuable tool for debugging UEP operation. It is essentially serial readouts over IP, sent to a
dedicated server. If issues are present Evertz can help install and setup a syslog server for constant
monitoring of UEP activity.

External Syslog:

This parameter allows the user to enable or disable sending syslog information to

the configured external server.

Syslog Server IP:

This parameter allows the user to assign the external syslog server IP address.

This will be the address of a PC with the syslog server software installed (ex Kiwi Syslog Server).

Output Port MUX Select

BNC 2 Output:

This parameter allows the user to select the BNC 2 output type. Choices available

are Contribution encoder ASI or HD/SD-SDI Loopout (HD/SDI-Loopout will forward the currently
selected input).

BNC 4 Output:

This parameter allows the user to select the BNC 4 output type. Choices available

are Contribution encoder ASI or HD/SD-SDI Loopout (HD/SDI-Loopout will forward the currently
selected input).

System Control

Default Set:

This parameter can be used to reset most 3080UEP parameters to factory default

values. All parameters except the below will be reset to Factory defaults:

•

Control Port IP address, Netmask and Gateway will be preserved.

•

Syslog Configuration will be preserved.

•

Presets will be preserved.

•

SNMP Trap destinations, Faults and Video Notify status will be preserved.

Reboot:

This control can be used to soft reboot the UEP. It will cycle the power relay and cause an

effective power cycle.

Содержание 3080UEP Series































































Результаты поиска

Содержание 3080UEP Series

Отзывы:

Похожие инструкции для 3080UEP Series

Бренды по названию

Популярные бренды

evertz 3080UEP Series, Руководство пользователя

Результаты поиска

Содержание 3080UEP Series

Отзывы:

Похожие инструкции для 3080UEP Series

Бренды по названию

Популярные бренды