1275T / 1285T Series
Digital Clock Display
OPERATION
Revision 1.0
Page - 11
4.2.2. Front Panel Displays
The main LED display on the 1275T/1285T series displays consists of sixty LEDs around the outside
of the face and a six character 16 segment alphanumeric display. In normal display modes the six
digits are used to display the time or date.
When in the Setup menu, the alphanumeric display is used to display menu items, and the six large
digits are used as alphanumeric displays to indicate the value of the menu item. When setup, the
alphanumeric displays can show the date.
4.3. SETUP MENU – TOP LEVEL
The following section gives a brief description of the menu items available when you enter the
Setup
menu. Sections 4.3.1 to 4.3.7 provide detailed descriptions of the
Setup
menus. The tables in these
sections are arranged in an indented structure to indicate the path taken to reach the control. Menu
items or parameters (in this section) that are underlined indicate the factory default values.
IP
Configures the Input Source for the display.
FR
Configures the Frame Rate of the output LTC.
DF
Configures the Date Format used to encode dates on the output LTC.
LZ
Configures the output LTC time zone offset.
TZ
Configures the time zone offset.
DZ
Configures the Daylight Saving Time rules.
DS
Configures the Time or Date Display.
TD
Configures the Time Display Format (12 or 24 hour).
DD
Configures the Date Display Format (MM DD YY, DD MM YY, or YY MM
DD).
ST
Configures the Time when there is no input.
SD
Configures the Date when there is no input.
IC
Configures the Internet Protocol items.
