1275T / 1285T Series
Digital Clock Display
OPERATION
Revision 1.0
Page - 21
4.3.8.3.
Setting the Internet Address
IC
With this menu item, you can set the IP address used for static networks.
See section 0 for IP setting instructions. The default is 10.0.0.1
IA
xxx.yyy.zzz.aaa
4.3.8.4.
Setting the Internet Net Mask
IC
With this menu item, you can set the IP net mask used for static networks.
See section 0 for IP setting instructions. The default is 255.255.255.0
IM
xxx.yyy.zzz.aaa
4.3.8.5.
Setting the Internet Gateway Address
IC
With this menu item, you can set the IP gateway address used for static
networks.
See section 0 for IP setting instructions. The default is 0.0.0.0
IG
xxx.yyy.zzz.aaa
4.3.8.6.
Showing the Internet Address In Use
IC
With this menu item, you can see the IP address used by the
1275T/1285T for static or dynamic networks.
In dynamic networks, the server allocating addresses will determine the IP
in use. This shows address in use if DHCP is selected, and the Internet
Address set above if static is selected.
The display will walk through the 4 octets of IP address in a similar method
to the setting of IP’s, but the
ITEM
and
SELECT
buttons will have no
effect.
IU
xxx.yyy.zzz.aaa
4.3.8.7.
Selecting the Trap IP
IC
With this menu item, you can select the trap that the TA instruction affects.
There are 4 trap addresses that can be used.
If the trap address indicated by this is set, then there will be an “i” before
the number. For example if traps 1 and 3 have their IP addresses set, as
this item is scrolled through, it would show:
“i1”
“ 2”
“i3”
“ 4”
TS
1
2
3
4
