EverRide Hornet EZYN2048S, Руководство оператора и каталог запасных частей

Страница: 52 / 110

45 -
LUBRICATION AND MAINTENANCE
LUBRICATION
M
A
ain
N
ta
D
in
M
Sh
A
a
I
r
N
p
T
C
E
or
N
ne
A
r
NCE - 4
Follow Original Pattern
30 Degree Angle
1/32 INCH
4
key has been removed.
CAUTION: The blades may be sharp.
Wear gloves or wrap them in a towel
before handling them.
Inspect the blades daily for straitness, sharpness,
and balance. Replace the blades if they are
cracked, worn, bent or out of balance.
NOTE : Keep blades sharp. Mowing with
dull blades will cause poor cut perfor-
mance. It will also put additional strain on
the engine by slowing the mower cutting
speed.
WARNING: Never try to straighten a
blade which has been bent or try to weld
a blade that is cracked. Always replace
with a new blade to assure safety.
To sharpen the blades, remove the blades by in-
serting a block of wood and turning the blade bolt
counter clockwise.
CAUTION: Always wear safety eye pro-
tection when sharpening the blades.
IMPORTANT: When sharpening blades,
be sure to grind the same amount on each
side. Unbalanced blades will cause exces-
sive vibration and could cause the spindles
to wear prematurely.
Check the blade balance by inserting a horizon-
tal rod through the center hole of the blade. The
heavy side of the blade will drop down. Sharpen
the heavy side of the blade until the blade is bal-
anced.
After sharpening, install the blades back onto the
mower deck. Make sure the wings are facing up.
Reinstall the blade bolt and lockwasher and torque
the blade bolt to 110 ft. lbs.
CLEANING GRASS BUILDUP FROM
DECK
Be sure to wear a thick glove or wrap the blade in a
towel to protect your hands from being cut. Insert
the blades in a vise and use a mill file or grinder.
File the blade along the original angle until the
blade tip is at a 30
°
angle again.
CAUTION: Before cleaning grass build-
up, be sure the engine has stopped and
the key has been removed.
Cleaning the underside of the deck regularly will
help maintain deck cutting efficiency. Clean the
underside of the deck as often as possible.
Stop
Block
Blade
Balance Rod