49
ENGLISH
9.2.8 VIEWING THE HARD BLAST CHILLING CYCLE
►
The DIS1 display shows the temperature of the
needle probe for the cycles with temperature or
the temperature of the cell probe for the cycles
with time.
►
The display DIS2 shows the time in decrease
for both the temperature cycles and the time
cycles.
The time used for the temperature cycles is given by the value of the parameter.
For temperature cycles the decrease of the time starts only if the temperature of the needle
probe is lower than the value.
►
The HARD led
is lit during the first phase, while it flashes during the second phase of
the cycle.
►
Press the DECREASE button
to view, on DIS2, the elapsed time from the start of the
cycle.
►
During a temperature cycle you can view the temperature of the cell probe by pressing the
HARD button
.
The visualisation remains on the displays for five seconds.
►
During a time cycle you can view the temperature of the needle probe by pressing the TEMPERATURE
button.
.
The visualisation remains on the displays for five seconds.
When the temperature of the probe reaches the setpoint, or the preset time expires for a time
cycle, the first phase ends and is automatically switched to the second phase, which ends when
the temperature of the needle probe reaches the defined value or the time expires. The buzzer
sounds and the storage phase begins.
►
The buzzer can be silenced by pressing the DECREASE button.
.
►
During the storage phase, pressing the DECREASE button
allows you to view the total
duration of the hard cycle
►
You can view the temperature of the needle probe by pressing the NEEDLE PROBE button
, display will remain on the displays for five seconds.
NOTE:
: If the temperature of the needle probe reaches the setpoint within the specified time, the
display DIS2 will flash, however, the cycle will continue until the setpoint is reached.
