background image

15

For queries or additional product information, please call our Service Centre on: 

087 997 0865

Please have your model name on hand.

www.everlast.com

TROUBLE SHOOTING

PROBLEM

SOLUTION

The elliptical trainer wobbles when in use.

Turn the rear stabilizer end cap on the rear stabilizer as 
needed to level the elliptical trainer.

There is no display on the computer console.

1. Remove the computer console and verify the wires that 

come from the computer console are properly connected 
to the wires that come from the front post.

2. Check if the batteries are correctly positioned and battery 

springs are in proper contact with batteries.

3. The batteries in the computer console may be dead. 

Change to new batteries.

There is no heart rate reading or heart rate reading 
or is erratic / inconsistent.

1. Make sure that the wire connections for the hand pulse 

sensors are secure.

2. To ensure the pulse readout is more precise, please 

always hold on to the handlebar grip sensors with two 
hands instead of just with one hand only when you try to 
test your heart rate figures.

3. Gripping the hand pulse sensors too tight. Try to maintain 

moderate pressure while holding onto the hand pulse 
sensors.

The exercise bike makes a squeaking noise 
when in use.

The bolts may be loose on the 

exercise bike

, please 

inspect the bolts and tighten the loose bolts.

Содержание VECTOR BIKE

























Отзывы: