CUSTOMER SERVICE 1-888-707-1880 Dyaco Canada Inc.©2014
13
3
Upper Swing Arms
Hardware Step 3
#127
. 5/16” × 7T
Nyloc Nut (6 pcs)
#159
. 5/16” × 1-3/4” Hex
Head Bolt (6 pcs)
#160
. 5/16” × 23 × 7T
Curved Washer (4 pcs)
#161
. Switch Wire
Cap (2 pcs)
1. Slide the Swing Arm Bushing (
162
) onto the left (
16
) and right (
17
)
Upper Swing Arms. Make sure the wide part is at the bottom.
2. Attach the wire (
166
) from the left Upper Swing Arm (
16
; Incline
buttons on front) to the wire (
167
) that exits the Console Mast Tube (
12
).
Slide the switch wire cap (
161
) onto the wire with the wide side facing
the Swing Arm.
3. Insert the Upper Swing Arm (
16
) into the Lower Handle Bar. Fasten
together with three Hex Head Bolts (
159
) and two Curved Washers (
160
).
4. Repeat steps 3.2 & 3.3 from above on the right side. You will connect
wires (
165)
to (
167)
.
