Customer Service 1-888-707-1880
5 Maurice Pincoffs Canada Inc. © 2010
ASSEMBLY INSTRUCTION
This manual is designed to help you easily assemble, adjust and use this machine. Please read this
manual carefully. For the sake of familiarizing yourself with the parts identified in the instruction, first
study the overview drawing. Set all parts in a clear area on the floor and remove the packing material.
Refer to the parts list for help to identify the parts. It will take two people to assemble your unit.
STEP 1
1.
Attach the two levelling knobs
(46)
to the bottom of rear stabilizer rail
(2)
.
2.
Attach the rear stabilizer rail
(2)
with two levelling end caps
(47)
to the welded curve bracket of the
main frame
(1).
Secure using two curved washers
(74)
, two spring washers
(18)
, two carriages bolts
(48)
and two cap nuts
(73)
.
3.
Attach the front stabilizer
(80)
with two transportation wheels
(76)
to the front welded curve bracket of
the main frame
(1).
Secure using two carriage bolts
(75)
, two curved washers
(74),
two
spring washers
(18)
and two cap nuts
(73).
NOTE: Ensure that the bolts are fastened securely
STEP 2
1.
Slide the upright cover
(78)
onto the upright
(10).
2.
Connect the motor wire
(83)
to the computer extension wire
(88).
3.
Connect the sensor w/ wire (
85
) to the computer extension wire
(88).
4.
Attach the upright
(10)
into the main frame
(1).
Secure using six allen head bolts
(24),
six spring
washers
(18),
two curve washers
(74)
and
four flat washers
(72)
.
NOTE:
Please do not tighten the allen head bolts
(24)
until you have all of the bolts attached to the
upright. When all bolts have been attached to the upright you can firmly tightened them.
Be careful not to pinch the wires when you tighten all bolts.
5.
Slide the upright cover
(78)
to end of upright
(10)
.
78
10
85
88
83
1
