Customer Service 1-888-707-1880
13 Maurice Pincoffs Canada Inc. © 2010
NOTE
:
1. The program will not start until you press the START / STOP button
2. If you don’t set the program time, the computer will count up from one second up to
99:59 Minutes, and use the default workout time, 30 minutes, to cycle run the
program profile.
3. The computer will count down from the program time that you set. When the timer
counts down to zero, the computer will alert you with an audible alarm that your
workout is complete. You can press any button to stop the audible alarm.
OPERATION DESCRIPTIONS
1.
Monitor requires four “AA” batteries.
2.
To stop a running program, press the
START / STOP
button. In this mode, you can press the
START / STOP
button again to continue to run the current program. Or, you can use the “
▲
/
▼
”
buttons to select a new program. The function values of
DISTANCE
and
CALORIE
will continue to
accumulate.
3.
When you complete a program, press the
START / STOP
button to stop the program. You can use
the “
▲
/
▼
” buttons to select a new program. The function values of
DISTANCE
and
CALORIE
will
continue to accumulate. This will allow you to run several programs and still know the total
DISTANCE
and
CALORIE
during the workout.
4.
If you want to restart with a new program, press the
RESET
button to reset all of the function values
to zero. Use the “
▲
/
▼
” buttons to select a new program.
5.
The computer will shut off automatically after 4 minutes of inactivity, and the function values,
DISTANCE
and
CALORIE
, will be kept.
