Everglades 455 CC, Руководство пользователя

Страница: 46 / 200

46 46
Helm Control Systems
When only the port and starboard engines are se-
lected, the port lever will control the port engine
and starboard lever controls the starboard engine.
The center engines will remain in neutral.
When all four engines are selected during nor-
mal operations, the port and port center engines
are controlled by the port control handle and
the starboard and starboard center engines are
controlled by the starboard control handle. The
computer automatically synchronizes the rpm of
the port center engine with the port engine and
the starboard center engine with the starboard
engine whenever all four engines are selected.
Another engine synchronizer feature built into the
control system can be selected to synchronize all
four engines.
Control Functions and Features
Most electronic engine controls and key pad have
integrated switches and indicator lights which al-
low the operator to control all aspects of the boat’s
propulsion system. LED lights on the control pad
indicate that the control is activated and the en-
gines can be started.
The most common features activated or
monitored by the keypad are:
• Starter lockout, which prevents the engine
from being started in gear.
• Gear lockout, which allows the engine RPM to
be advanced in neutral safely.
• Battery voltage warning indicator that warns
the operator of high or low voltage supplied
to the system (audible alarm).
• An engine synchronization feature that
automatically keeps all engines at the
same RPM while cruising. Refer to Engine
Synchronizing in this section and the control
systems owner’s manual for more information
regarding engine synchronization.
• Engine speed UP/DOWN feature that allows the
operator to increase or decrease the engine
speed in increments while operating at certain
speeds. Station selection (a separate button
on some controls) that allows the operator to
transfer control from one station to another
with the push of a button on boats with two
helm stations. Each station must be selected
by the operator before the controls will operate
from that station.
Yamaha Helm Master Control Key Pads
& Station Transfer Button
Yamaha Engine Speed Up/Down Control