Everglades 455 CC, Руководство пользователя

Страница: 123 / 200

123
Exterior Equipment
Windlass
The windlass is mounted in the compartment be-
low the hatch in the deck. The anchor is stored
on the roller and is raised and lowered by the
windlass. The anchor line is stored in the rope
locker and routed out through the windlass to the
anchor chain.
The anchor is lowered by releasing the anchor
chain from the chain binder and pressing the
WINDLASS DOWN switch at the helm or on the
remote switch. The windlass control switches are
protected by a circuit breaker in the digital switch
control module.
After the anchor is set, the windlass must not be
left to take the entire force from the anchor line.
Boats lying to their anchor in a high swell or heavy
weather conditions will snub on the line. This can
cause slippage or apply excessive loads to the
windlass. The line should be made fast to the
cleat provided to relieve the load on the windlass.
The anchor is hauled in by releasing the line from
the cleat and pressing the WINDLASS UP switch.
Always start the engines before hauling the an-
chor and motor up to the anchor as the line is
retrieved to relieve the load on the windlass. Once
the anchor is retrieved, independently secure the
anchor to the chain binder to prevent it from being
accidentally released. This is especially important
while the boat is underway.
A. Raw Water Hose Connection F. Bow Roller Assembly
B. Fresh Water Washdown Hose Connection G. Rope Locker
C. Chain Binder H. Remote Windlass Switch Connection
D. Windlass I. Windlass Emergency Clutch Release Tool
E. Anchor Line Cleat
A
B
D
C
E
H
G
F
Windlass Compartment
I