87
5.10.4
I/O Control
Figure 5-40
is a screen shot of the I/O Control Setting Menu. This menu is used to define the settings for
controlling the DVR through RS232 or RS485.
Figure 5-40 System Menu – I/O Control
RS-232
Baud Rate:
Transmission speed of the RS-232 interface. Available speeds: 1200, 2400, 4800, 9600,
19200, 38400, 57600, or 115200 BPS.
Data Bit:
Number of data bits: 8 or 7.
Stop Bit:
Number of stop bits: 1 or 2.
Parity:
Parity mode: none / odd / even.
RS-485
PTZ Protocol:
Select the PTZ protocol from the dropdown list: Transparent, Pelco D, Pelco P, Everfocus
or Samsung. (
NOTE: all cameras must be on the same protocol
)
485 ID:
RS-485 address, addressable area: 0 ~ 127. This address is equivalent to the unique ID number
when controlling the DVR through the RS-485 keyboard EKB 500 (DEVICE no.).
Baud Rate:
Transmission speed of the RS-485 interface. Available speeds: 1200, 2400, 4800, 9600,
19200, 38400, 57600, 115200 BPS.
Data Bit:
Number of data bits: 8 or 7.
Stop Bit:
Number of stop bits: 1 or 2.
Parity:
Parity mode: none / odd / even.
Control
IR Remote ID:
ID used by the remote control, selectable from 1 to 4.
Содержание PARAGON Series
Страница 1: ...Instruction Manual P Pa ar ra ag go on n S Se er ri ie es s D DV VR R...
Страница 103: ...97...
Страница 104: ...98...
Страница 113: ...107 Install the ePlusDVR cab file when prompted to do so Once the file finishes installing the following screen appears...
