62
Network Loss:
Figure 5-19 Alarm & Event Menu – Event – Network Loss
Log:
Check box to record events in the log.
Buzzer:
Check box to enable buzzer when network is lost.
Alarm Output:
Select from the dropdown menu whether or not an alarm signal shall be transmitted through
one of the alarm outputs to another device. Choose either “
NONE
” (disabled) or “
1
”, “
2
”, “
3
”, or “
4
”
(transmission through alarm output 1~4).
Output Type:
Output action when alarm is triggered.
Timeout: Alarm output remains switched for the set duration.
Permanent: Alarm remains switched until user presses the “Enter” key on front panel.
Transparent: Alarm output remains switched as long as there is an event.
Trans+Timeout: Alarm output remains switched until event ends and afterwards for the set duration.
Timeout Duration:
The amount of time the buzzer sounds when DVR stops recording. Duration selectable
from 1 to 150
seconds.
Содержание PARAGON Series
Страница 1: ...Instruction Manual P Pa ar ra ag go on n S Se er ri ie es s D DV VR R...
Страница 103: ...97...
Страница 104: ...98...
Страница 113: ...107 Install the ePlusDVR cab file when prompted to do so Once the file finishes installing the following screen appears...
