EverFocus PARAGON Series, Инструкция по эксплуатации

Страница: 62 / 128

56
HD Temperature:
Figure 5-13 Alarm & Event Menu – Event - HD Temperature
Log: Check box to record events in the log.
Buzzer: Check box to enable buzzer when hard drive’s temperature is over the “Temp. Warning Limit”.
Email Notify: Check box to enable email notification when temperature is over the “Temp. Warning Limit”.
Network Alarm: Check box to send out a network alarm to client PC. (requires PowerCon software and
setting up Alarm Server in Network Setup menu)
Stop Recording: Check box to stop recording when HD’s temperature is over the “Temp. Warning Limit”.
Temp. Warning Limit: Sets the trigger temperature for all other active settings in HD Temperature.
Choose from 55
°
C /131
°
F~85
°
C /185
°
F.
Alarm Output: Select from the dropdown menu whether or not an alarm signal shall be transmitted through
one of the alarm outputs to another device. Choose either “ NONE ” (disabled) or “ 1 ”, “ 2 ”, “ 3 ”, or “ 4 ”
(transmission through alarm output 1~4).
Output Type: Output action is locked to:
Transparent: Alarm output remains switched as long as there is an event