EverFocus PARAGON 264x1, Руководство пользователя

Страница: 24 / 99

17
3 GENERAL DVR OPERATIONS
This chapter introduces the operations of major functions such as playback, layout changes, sequence, triplex operations,
copy, and search.
3.1 RECORD
By default, the DVR will start to record all channel feeds when it is switched on the first time. This will only change
after the following configuration actions:
1. The DVR will
not
record the feeds of any camera channels whose “Install” tabs (on their configuration pages) have
been
un
checked. In addition, if an Installed camera’s Record Mode has been set to “Event Only”, the DVR will only
record that camera’s feed if a pre-specified Event occurs. (Refer to the Camera Setting section in the “The
Configuration Submenu” chapter for more details.)
THUS, to start/stop recording a channel’s feed, simply
check/uncheck the “Install” tab on that camera’s setup page (and make sure that the Record Mode is set to
“Event” if you want the camera to record continuously).
2.
If
a recording
schedule
or event is configured and activated (check the “
Schedule Record”
box on the Record &
Play > Record menu page to activate the schedule),
the DVR will follow the recording settings of the schedule
,
and only record if the schedule parameters have been met. Uncheck the “Schedule Record” box to return to
independent recording (i.e. Event Only or Event).
3.2 LOGIN
In order to access the DVR’s control software, users may be asked to
log in for ID and authority identification. To log in, follow these steps.
1. Right-click on the screen or press the Menu button to display the
Main Menu.
2. Click on the Configuration icon (or scroll to it and press the “
Enter
”
key) to bring up the following screen:
3. Select the username from the drop-down list and input the password. The defaults are:
Username: admin (lower case)
Password: 11111111
•
To input the password with the mouse: Click on the password field to bring up the on-screen keyboard. Click on
each button to input the desired characters for the password. When finished, click the Confirm icon (
) to save
and exit.
Chapter
3