EverFocus NDVR Скачать руководство пользователя

Страница: 96 / 152

NVR/DVR/Hybrid NDVR System

95 -

Options:

Adjust the setting only when the server is stopped.

Port:

Assign a port for the clients to connect to your system via Remote Live Viewer. Default port is 5150.

Maximum Connections:

Number of connections that are allowed to connect to the system. Default is 16

channels and maximum is 128, one camera video counts as one connection.

Use Default Web Server:

Activate the Web server by checking the box; clients will be able to watch live

video via Internet Explorer. The port for live streaming server is set to 80 by default.

Note:

This must be checked in order to access system via IE*.

Save Log:

Save the log information at appointed folder.

Enable Audio:

Select this option to enable the audio transmission along with video stream.

Black / White List

White List:

Check the “Enable White List” box to activate the white list filter. Only IP from the white list is

allowed to log in.

Black List:

Check the “Enable Black List” box to activate the black list filter. IP from the black list will be

blocked.

IP Address:

Enter an IP address into the IP address field on the left. To add an IP address range to the

system, enter 2 sets of IP address to indicate a series of IP(s).

Add/Delete:

Add the IP(s) onto the list or remove it from the list.

Apply to All Network Servers:

Apply the settings to both the live streaming

server and the remote

playback server.

Black/ White
list

IP address

Enable list

Apply to all

Содержание NDVR

























































































































































Результаты поиска

Содержание NDVR

Отзывы:

Похожие инструкции для NDVR

Бренды по названию

Популярные бренды

EverFocus NDVR, Руководство пользователя

Результаты поиска

Содержание NDVR

Отзывы:

Похожие инструкции для NDVR

Бренды по названию

Популярные бренды