EQ610s
21
COMM
-
CAMERA ID
Select the camera’s ID number.
-
DISP CAM ID
Switch this OFF if you don’t want to display the camera’s ID on the
display monitor, or select where you on the monitor’s screen you want it
displayed.
-
BAUD RATE
Select the relevant Baud rate. (2400 ~ 38400)
-
PROTOCOL
Select the camera’s protocol. (EVF-1, Pelco D, or Pelco P)
SYNC (Only available to cameras with AC power input)
Select the SYNC mode for the camera model. INT means Internal Sync, LL
means Line-Lock Sync. If you select LL, go into the LL submenu to select the
Phase value.
LANGUAGE
Use the LEFT & RIGHT buttons to select your language preference.
The options are:
•ENGLISH •
Simplified Chinese
•
Traditional Chinese
FIRMWARE
This line displays the firmware version currently installed on the camera.
RESTORE
Select NO to exit, or select YES to restore all the settings to the default
values.
Note:
The following items will not be restored: CAM ID, PROTOCOL, BAUD
RATE and LANGUAGE.
6.10 EXIT
Selecting EXIT will AUTOMATICALLY SAVE your settings and close the OSD
screen.
