EQ610s
18
-
DETECT SENSE
The higher the number, the more sensitive the camera’s motion
detector will be.
-
BLOCK DISP
Block Display displays small blocks around movement points on the
screen. It is generally used to test if the motion detection function is
working. Set the block display to OFF for normal operation.
-
DETECT AREA
Press ENTER to enter the setting submenu and select the Detect Area by
using your direction buttons to move the blue cursor to the area on the
grid that you want to select. Once the cursor lands on the desired block,
press ENTER to select that block. The block will become clear once you
have selected it. You can select as many blocks as you want, on any part of
the screen.
-
MONITOR AREA
Press ENTER to enter the submenu and set the Monitor Area.
-
AREA SEL: Use your LEFT and RIGHT buttons to choose one of
a maximum of four possible Monitor Areas (on-screen blocks).
-
MODE: Once you have selected a monitor area, set the Mode
to ON to set this area’s parameters in the setting bars below
this menu item (TOP, BOTTOM, LEFT, RIGHT).
-
ALARM OUT
Set this setting to ON if you have connected an alarm system to the
camera’s terminal block.
-
ALARM TIME
Set the time period (in seconds) that the camera will keep sending an
alarm signal to the alarm device, once an alarm has been triggered.
PRIVACY MASK
Options are ON/OFF. Set to ON and click ENTER to bring up this submenu
for further settings.
** PRIVACY MASK **
AREA SEL
1/15
MODE
ON
POSTION
SET<
┘
COLOR
BLACK
TRANSP
0.50
MOSAIC
OFF
RETURN<
┘
